Honeywell HRSD40F, Руководство пользователя

Страница: 86 / 168

86
HRSD40F DVR User Guide
3. Save your changes by highlighting OK and pressing . Select Cancel to exit
the screen without saving the changes.
Setting the Minimum Number of Motion Detection Blocks
You can adjust the minimum number of detection blocks that must be activated to
trigger a motion alarm. Daytime and Nighttime can be set independently.
Highlight a field under the Min. Blocks heading and press . The Motion Detection
- Min. Blocks screen appears.
Figure 3-56 Motion Detection - Min. Blocks Setup Screen
For greater sensitivity, select a smaller number of blocks. A smaller number means that
fewer detection blocks need to be triggered for motion detection.
Viewing How the DVR Reacts to Motion
Zone View allows you to observe how the DVR reacts to motion. When in the motion
viewing mode, any detected motion within the zone displays in red.
Highlight the box beside Zone View , and press to toggle it On and Off .
Ignoring Excessive Motion
You can control excessive event logging and remote notification of motions detected
after the motion dwell time by adjusting the motion ignoring dwell intervals.
1. Highlight the box beside
Motion Ignoring Interval and press . A drop-down
menu of intervals ranging from 1 to 5 seconds or Never appears.
2. Select an interval from the drop-down menu.
Clear All Deactivates all blocks so they will not detect motion.
OK Accepts changes and closes Zone setup.
Cancel Exits Zone setup without saving changes.
Table 3-11 Motion Detection Zone Setup Screen Options
Option Function