Honeywell HRSD40F, Руководство пользователя

Страница: 111 / 168

Document 800-03097 Rev C 111
03/09
Operation
Change the toolbar location by clicking the empty space on the left side of the toolbar
and dragging it to where you want it located on the screen.
Setting PTZ Camera Preset Positions
Using the PTZ Menu
1. Press while in the PTZ mode. The PTZ feature menu appears.
Figure 4-5 PTZ Feature Menu
2. Set the feature you wish to control by selecting it from the menu. Refer to the
camera manufacturer's instructions for the proper settings.
Note Depending on the camera specifications, some features may not
be supported.
3. Exit the PTZ Menu by either:
Clicking Set Preset to save the settings (see below).
Or
Clicking
Quit to close the menu without saving the settings.
Saving a Preset Camera Position
After you have the camera at the desired settings, you can save camera position
settings as presets so that you can go directly to desired views.
1. Select
Set Preset in the PTZ Menu. The PTZ Preset screen appears.