Honeywell HNDR series Скачать руководство пользователя страница 65

Страница: 65 / 76

3. HNDR-Web Settings

[SETUP Setting]

•

Initial HNDR-Web is not configured with default settings.

To modify configurations, press the

“

SETUP

”

button on the lower right after logging in.

Enter the information of the site to which the HNDR are connected in Site Name, IP,

Camera No., and press the

‘

Save & Apply

’

button at the bottom. And the Setup window will be

automatically closed, immediately applying the information just entered to the

HNDR-Web monitor screen.

To delete the currently set items, check the

‘

Del

’

box and press the

‘

Save & Apply

’

button.

•

When you log in with the Administrator account,

‘

User Select

’

appears on the top, allowing you to

•

For

‘

guest

’

accounts created, for which

‘

guest

’

users do not have a permission to modify settings,

you should login with the

‘

admin

’

account and adjust the

‘

guest

’

user

’

s configurations.

Содержание HNDR series













































































Результаты поиска

Содержание HNDR series

Отзывы:

Honeywell HNDR series, Руководство пользователя, Страница: 65 / 76

Результаты поиска

Содержание HNDR series

Отзывы: