Honeywell HNDR series Скачать руководство пользователя страница 5

Страница: 5 / 76

About The Product

Developed with proven technology of Honeywell Co., Ltd., this product guarantees the quality by having

passed the reliability and compatibility tests.

This User Manual is prepared exclusively for HNDR Users.

•

Honeywell Co., Ltd. reserves the copyright for this User Manual.

•

Unauthorized copying of this User Manual is explicitly prohibited.

•

For loss or damage caused by the use of non-standard products and by non-observance of stipulations

as described in the User Manual, Honeywell Co., Ltd. should not be held responsible.

•

For additional information required for installation and in case HNDR needs to be disassembled for

upgrading of system functions or repair, please request for technical assistance from where you

purchased this product or the main office of Honeywell.

•

HNDR is the registered trademark of Honeywell Co., Ltd.

•

Safe use of this product is guaranteed, as the product successfully completed domestic EMI Registration

for appliance for home and industrial use as well as overseas certification such as CE (Europe) and FCC

(U.S.A.).

•

The contents of this Manual are subject to change to enhance product performance without prior

notification.

Thank you very much for using the HNDR (Honeywell Network Digital Recorder )
from Honeywell.

Содержание HNDR series













































































Результаты поиска

Содержание HNDR series

Отзывы:

Honeywell HNDR series, Руководство пользователя, Страница: 5 / 76

Результаты поиска

Содержание HNDR series

Отзывы: