Honeywell HNDR series, Руководство пользователя, Страница: 36 / 76

5. Camera Motion/Image Setup
•
Sensitivity adjustment
Allows you to adjust the rate of motion (volume). The large percentage (%) is, the subtler motion
the camera can detect, that is, the recording data increases.
•
Rate of motion
Allows you to adjust color and sensitivity of a moving object. The large percentage (%) is, the
subtler difference of a moving object and the surrounding color the camera can detect, that is, the
recording data increases.
•
You may decide the motion settings by clicking
“
Detection test
”
with various motion area and
viewing the displayed movement of a motion in Dot units on the screen.
35
•
Brightness / Contrast / Saturation / Hue: allows you to adjust color of images.
•
Default value: resets the control settings of all images to default values.
1
2
3
4
1
[Motion detection area setting]
•
Whole area: Select to monitor motion in all areas covered by the camera.
•
Partial area: Allows you to monitor motion in specific areas by pressing the
“
Add
”
button and
specify specific regions.
You may specify up to 20 areas, and erase them by pressing
“
Delete.
”
•
Display detected area: Select and click the
“
Detection test" button to start monitoring the motions
when it occurs. (
“
Detection display
”
indicates that motion is detected with color change and red
dots.)
2
[Relay options]
Relay options are applicable to motion detection only.
•
Use Relay: Select to use relay output
•
Ports 1~4: Select all the devices to use.
•
Latch time: Relay output operate during the specified time when a motion occurs.
3
[Motion setting]
4
[Color control]
5
5
[Select All]
•
If click this, Every of settings in
“
Color & Motion
”
becomes same as for all of camera.
•
This button is effective when all of settings for all camera shall be same as setting in No. X