Honeywell HNDR series, Руководство пользователя, Страница: 20 / 76

3. Monitor Controls
1
2
3
4 5 6
[Control Switch Button Display]
1
•
Select the
“
PTZ " button with the mouse to display
“
PTZ Control" buttons, with which you can move
cameras equipped with Pan/Tilt device to upward, downward, to the left, to the right, or diagonally.
Zoom/Focus adjustments are also available.
•
Selecting camera directions using the direction switch button is available.
•
It can be used to control our Scan Dome (HSD-251, HSDN-251), Zoom (GC-655/755) Camera, and
RX (HRX-1000, HRX-2000).
[PTZ Control]
2
3
•
Select the search button with the mouse to run "DVR Search" (without exiting the main
program) and open a search window, where you can retrieve desired image/voice data.
[Search Button]
4
•
Select the setup button with the mouse to run
“
DVR Setup" and open a search window, where
you can change HNDR settings.
[Setup]
5
•
Select the exit button with the mouse to display a password verification window to verify shell-
monitoring the HNDR. When password authentication is verified, the HNDR system is terminated
with a buzzer sounding for about 1 minute, and the system is re-booted.
•
Please note that exiting will be not generated continuously unless
“
Hot key
”
is selected on
shell monitoring.
[Exit System]
6
19
•
Displays the version of the HNDR program.
[Version Display]
7
7
8
•
Select the
“
Control
”
button with the mouse to display a window ( ), where you can control the
camera equipped with a Pan/Tilt device.
•
A switch button ( ) also appears that can control
“
Image
”
and
“
PTZ
”
.
4
6
[Control Button Display]
8
•
Select the
“
IMAGE" button with the mouse to display
”
IMAGE CONTROL" buttons, with which you
can choose a desired camera and adjust the
“
Brightness
”
,
“
Contrast
”
,
“
Saturation
”
, and
“
Hue
”
of
images.
•
Default value: resets the control settings of all images to default values. ( )
[IMAGE Control]
•
Select the
“
PTZ" button with the mouse to display a window ( 4 ), where you can control the
camera equipped with a Pan/Tilt device.
•
Select the
”
IMAGE" button with the mouse to display a window ( 5 ), where you can control
camera images.