Honeywell HNDR series, Руководство пользователя, Страница: 38 / 76

7. Sensor Setup
•
Select output ports ( Relay 1 ~4).
37
•
Specify the time for relay operation.
1
2 3
4
1
[Sensor information]
•
Use: Verify whether specific sensor are used.
•
Location: Verify the locations of the sensors.
•
Type: Verify the sensor types (N.C., N.O. ).
•
Camera#: Verify the connected cameras.
•
Check time: Verify the check time settings of the sensors.
•
Output relay: Verify the output relay port settings.
•
Latch time: Verify the latch time settings.
•
Preset : Verify the preset of ptz camera settings. ( ex. HSDN-251 )
2 [Sensor input information]
•
Use sensor: Select to use the sensor.
•
Sensor location: Specify the location of the sensor. (Use 8 characters or less.)
•
Sensor type: Specify the sensor type ( N.C, N.O ).
•
Connected camera: Specify the camera to connect.
•
Check time: Set check time of the sensor.
3
[Output Relay]
4
[Latch time]
•
Select preset to number (1~10) when camera can use preset function.
5
[Pan/Tilt Preset]