Honeywell HNDR series, Руководство пользователя, Страница: 35 / 76

4. Camera Recording Schedule Setup
34
1
2
1
[Recording schedule]
•
Normal: Records all the images from the camera.
•
Sensor recording: Records images only when there is a sensor occurs.
•
Motion Recording : Records images only when there is motion.
•
Not recording: Just displays images, but not recording.
•
Sensor/Motion recording: Stores images only when there is an occurrence of sensor or motion.
•
Event recording: You may set to record images in accordance with recording volume
adjustment when there is no motion, but otherwise to the maximum.
2
[Remote notify schedule]
•
Allows you to transmit data on the HNDR-Net system during the scheduled time zone or day of
the week. (Available for Motion and Sensor setup only.)
•
Setup: Specify the desired time zone or day of the week.
•
Clear: Deletes set schedules.
Specifying recording schedule by camera will enable saving images by day of the week and
time zone.
! Caution 8. Motion recording
–
Set to Motion recording by default.
Recording motion occurs depending on the Motion detection area/sensitivity
settings.
Please note that the larger the setting for adjusting change
volume/rate is, the larger the data to record becomes (V1.120 higher).
For more information, see p. 35.
3
3
[Select All]
•
If click this, Every of settings in
“
Schedule
”
becomes same as for all of camera.
•
This button is effective when all of settings for all camera shall be same as setting in No. X