Honeywell HD6 Series, Руководство пользователя

Страница: 83 / 152

5.9 FUNCTION PROGRAMMING, CONTINUED
5.9.2 VectorScan
Rev. 1.02 69 900.0679
22-June-2006
This menu option is only displayed when
Honeywell Maxpro mode, Honeywell VCL,
Pelco P, Pelco D, or American Dynamics
protocol is selected on the DIP switch on the
scan.
Position the cursor on 2 and press
Iris Open to program a VectorScan.
VectorScans 0-9 can be programmed and assigned to alarms or the default function.
VectorScans 1, 2, & 3 can be started using PreShot commands 87, 88, and 89
respectively.
1. Use the tilt up function on the joystick until the desired VectorScan number (0-9) is
displayed, then press Iris Open .
2. Use the tilt up and down and the pan left and right functions of the controller to
move between fields.
FIELD Usage
NUM (number)
Move the cursor to the desired field and press Iris Open to activate.
Use the tilt up and down functions of the controller to change the value.
If the field is more than one digit, each digit can be changed
individually by placing the cursor on the digit and using the tilt up or
down function.
PRESHOT
Selectable from 0 to 79. PreShots 80-99 are reserved for special
functions and cannot be entered in a VectorScan. When the field has
the desired number, press the Iris Open to select the number.
Iris Open also moves the cursor to the next field
VELOCITY
The Velocity field is the pan and tilt speed for the scan to go to the
PreShot (1 to 400
° /second.) The default is 400 ° /second.
DWELL
The dwell time is how long the scan waits before it goes to the next
PreShot in the list (0 to 99 seconds.)
FUNCTION PROGRAMMING
1 PTZ Tour
2 VectorScan
Program VectorScan • Program VectorScan n
↑↓ to scroll
NUM PRESHOT VELOCITY DWELL
Press Iris Open when done 1 __ __ __
2 __ __ __
3 __ __ __
4 __ __ __
5 __ __ __
6 __ __ __
7 __ __
D = Delete E=Exit S=Save