Honeywell HD6 Series, Руководство пользователя

Страница: 51 / 152

5.3 CONTROL OPTIONS, CONTINUED
If: Then:
VectorScan auto focus is ON The lens auto focuses when going to a
PreShot while running a VectorScan.
VectorScan auto focus is OFF The lens goes directly to the focus position
stored for each PreShot while running a
VectorScan. It does not autofocus.
5.4 DIAGNOSTIC OPTIONS
Select 4 from the MAIN MENU to access
Diagnostic Options. Diagnostic menus are
designed for assisting service technicians in
troubleshooting.
---- UltraDome HD6 ----
519543-1980
1 Language ............................... English
2 Display Options
3 Control Options
4 Diagnostic Options
5 Camera Options
6 Function Programming
ESC to Exit
Refer to the controller user’s manual for
operation of the controller to perform these
functions.
5.4.1 Coordinates
DIAGNOSTIC OPTIONS
1 Coordinates....................................OFF
2 Error Table .....................................OFF
3 Clear the Memory
4 Clear the Error Table
5 Display Error Tbl. Codes
6 Restore Default Settings
7 Reset Scan and Camera
8 Upload new firmware to HD6
ESC to Exit
Select 1 to turn the Pan and Tilt Coordinates
display ON or OFF.
Pan = xxx.x Tilt=xxx.x
When you exit programming, the coordinates
are displayed. The pan and tilt coordinates
are displayed in degrees
Rev. 1.02 37 900.0679
22-June-2006