Honeywell Galaxy Flex Скачать руководство пользователя страница 43

Страница: 43 / 246

Galaxy Flex Installer Manual

Print [24, Quick Menu 4]

Group status U = Unset, S = Set, P = Part Set, and L = Locked-out for each of the
groups displayed.

Note:

Enabling the Show Status option (refer to

Keypad [58]

) allows the group set

status to be displayed from the normal banner (when the system is set or unset)
by pressing

and

simultaneously.

Version of software in panel.

RIOs fitted includes the onboard RIOs.

Codes used include the manager, engineer and remote codes.

Comms 1 to 7 (Int Telecom, ISDN, Ethernet or GPRS, GSM, USB, Audio Module).
Comm 2 is not used.

Printer 0–1 (Printer Interface Module).

The number of MAX Modules on the system.

The number of DCM Modules on the system.

Panel location up to 16 characters of text entered in System Text parameter (option
51.15.2).

Default Set gives the default settings set up in option 51.17.

The number or RF Portals on the system.

The number of MUX Modules on the system.

The number of keypads on the system.

Print [24, Quick Menu 4]

Note:

A serial printer must be connected to the panel via a printer interface module.

Only information corresponding to the groups assigned to the user is printed.

Print Codes [24.1.1]

Prints user number and name, type and groups assigned.

Print Zones [24.1.2]

Prints address, function, group (if group mode is enabled), status, descriptor (if assigned),
status of the chime, omit and part attributes, the RIO voltage and the zone resistance in
ohms;

Print Log [24.1.3]

Prints all events in the log, starting with the most recent and working backwards.

Print All [24.1.4]

Prints codes, zones and log details respectively.

Содержание Galaxy Flex























































































































































































































































Результаты поиска

Содержание Galaxy Flex

Отзывы:

Honeywell Galaxy Flex, Руководство по установке, Страница: 43 / 246

Результаты поиска

Содержание Galaxy Flex

Отзывы: