60
107063-11 EN FR26 GLO 800 Printed in France
5.
Dry the emitter and receiver with a soft, dry, non-abrasive cloth. Ensure there is no
moisture left on the emitter and receiver units before power is applied.
6.
Connect power to the machine and perimeter guarding device.
7.
Perform the operational test to ensure proper functional readiness.
Mirrors
CAUTION
MIRROR DAMAGE
Use soft, clean, non-abrasive cloth to clean dust or dirt from mirror to prevent scratching
surface.
Failure to comply with these instructions may result in product damage.
1.
Dampen a soft, clean, non-abrasive cloth with 90% alcohol.
2.
Wipe the face of the mirror gently with the damp cloth. Do not rub hard to prevent
scratching the finish.
3.
Dry the mirror with a soft, dry, non-abrasive cloth.
4.
Perform the operational test to ensure proper alignment.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from