107063-11 EN FR26 GLO 800 Printed in France
37
a)
Install the brackets and the sensors without tightening the screws, and supply the units
with the correct power to supply the front panel indicators (refer to § 6.2 and § 6.3).
b)
Put the laser pen in the location notch of the emitter unit. The two positioning rings must be in
the location notch (refer to § 3.6).
c)
Put the target behind the receiver unit.
d)
Adjust the emitter in such a way that the laser red spot appears in the area of the receiver
location notch.
e)
Repeat the same operations with the laser pen on the receiver unit and the target behind
the emitter unit.
f)
Secure the adjustment by tightening the screws.
The same procedure can be used when individual deflection mirrors FF-SPZ01MIR are
involved. These are delivered with the correct target which indicate the position of the laser red
spot for a correct adjustment of the mirror.
Laser pen
Emitter
Receiver
FF-SPR
Target
Target
Backsight
notch
Re
ce
ive
r F
F
-SPR
Em
it
te
r F
F
-SPE
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from