107063-11 EN FR26 GLO 800 Printed in France
59
Dry Cloth
POWER APPLIED TO MACHINE CONTROL SYSTEM
Turn off and disconnect power from FF-SPS4 Series perimeter guarding device and machine.
Failure to comply with these instructions could result in death or serious injury.
CAUTION
FRONT PLATE AND FINISH DAMAGE
Gently wipe soiled areas with soft, clean, non-abrasive cloth. To prevent scratching clear
plastic front plate or finish, do NOT rub hard.
Failure to comply with these instructions may result in product damage.
Clean dust or loose, dry dirt from the emitter and receiver units using a soft, clean, non-
abrasive cloth as follows:
1.
Turn off and disconnect power to both the perimeter guarding device and the machine.
2.
Gently wipe the soiled areas with a soft, clean, non-abrasive cloth. Do not rub hard to
prevent scratching the clear plastic front plate or finish. If the dirt will not wipe off with a dry
cloth, clean units with a soap and water solution. See Cleaning with Soap and Water
below.
3.
Connect power to the machine and perimeter guarding device.
4.
Perform the operational test to ensure proper functional readiness.
Soap and Water
POWER APPLIED TO MACHINE CONTROL SYSTEM
Turn off and disconnect power from FF-SPS4 Series perimeter guarding device and machine.
Failure to comply with these instructions could result in death or serious injury.
CAUTION
FRONT PLATE AND FINISH DAMAGE
Do NOT use solvents to clean emitter or receiver to prevent damage to clear plastic front plate
and paint finish.
Failure to comply with these instructions may result in product damage.
If the emitter or receiver has been soiled with oily or greasy dirt, use a solution of mild soap
and water as follows:
1.
Turn off and disconnect power to the perimeter guarding device and machine.
2.
Dampen a soft, clean, non-abrasive cloth in the solution of mild soap and water. Squeeze
excess solution from the cloth.
3.
Wipe the soiled areas gently with the damp cloth. Do not rub hard to prevent scratching
the clear plastic front plate or paint finish.
4.
Rinse the cloth in clean water and gently wipe off any excess soap.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from