107063-11 EN FR26 GLO 800 Printed in France
41
•
If one or two sets of 45° mirrors are used, place the laser pen on the location notch
of the uppermost emitter located in front of the uppermost mirror. The laser red
spot must strike the middle point on top of the uppermost mirror:
4.
Secure the adjustment by tightening the fixing screws. Keep the laser pen in its location hole (or on
the location notch of the uppermost emitter) during this operation to keep the adjustment.
•
To adjust the light path, use only the 4 adjustment screws, located on the base plote
of each column. Do not change the position of the adjustable mirror (factory setting).
1 to 6: laser beam path
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from