5
Design and Function
enCore FC
Operating Instructions
Page 33 of 120
5.3.3 Operation and Navigation within the Display
Display test
Using the display test, you can check whether the device display of the
enCore FC is working correctly.
To run the display test, …
►
… switch to the home display if necessary.
►
Double-click the symbol to open the
Info
display.
►
Start the test with the action
Display test
.
During test mode, all pixels of the login area are alternately black and
white.
►
End the test with or
.
Different types of device displays
Main display
is the name of the first display of an AFB or a functionality of
the basic system; it shows the most important results of this functionality.
Depending on the AFB or functionality, further information is displayed in
subordinate device displays.
The
basic display
is displayed immediately after the device is started. If no
operation is performed during a preset time, the device switches back to the
basic display
automatically. For some device types, it is parameterizable
which display is used as basic display.
Changing the „basic display“
For most device types (e.g. devices that are intended for the use
in legal metrology), the basic display is fixed. In case that the
basic display is not fixed, you can parameterize it in enSuite for a
device parameterization in node
Displays
on tab
Basic
display editor
:
To define a display as basic display, select …
►
… from the 1
st
dropdown list
Basic display
the desired SFB
or AFB ...
Содержание enCore FC1
