Honeywell BW GasAlertMicro, Руководство пользователя

Страница: 19 / 83

GasAlertMicro
Getting Started
Table 5. Pushbuttons
Pushbutton Description
A
• To activate the detector press
A
.
• To deactivate the detector, press
A
and hold until OFF displays (approximately 5 seconds).
•
To enable/disable the confidence beep, when the detector is deactivated press and hold
C
. While holding
C
, press
A
. This enables/disables the confidence beep while activating the start-up process.
• To bypass calibration after auto zero press
A
.
•
To access the software level information, press
A
at any time from any of the user options.
G
• To increment a displayed value or to scroll up press
G
.
•
To enter the user options menu, press
G
and
H
simultaneously and hold for 5 seconds.
•
To clear the TWA, STEL, and MAX gas exposure readings, press
C
and
G
simultaneously.
• To quickly scroll through options press and hold
G
.
H
•
To decrement a displayed value or scroll down press
H
.
• To initiate calibration and enter alarm setpoints, press
C
and
H
simultaneously and hold for 5 seconds.
•
To quickly scroll through options press and hold
H
.
C
• To view the TWA, STEL, and MAX hold readings, press
C
.
•
To acknowledge latched alarms press
C
.
• To acknowledge a failed bump test screen press
C
.
• At any time after auto zero, and only prior to calibration gas being detected, press
C
to bypass calibration
and proceed to alarm setpoints.
9