Honeywell BW GasAlertMicro Скачать руководство пользователя

Страница: 28 / 83

GasAlertMicro

User Manual

In the event of an alarm condition, and if the low and high
gas alarms are set to latch, the audible and visual alarms will
persist until the alarm is acknowledged.

To enable/disable the latched alarm option, complete the
following:

1. From the user options menu, use

to scroll

to the

LAtchin ALArmS

option.

2. Press

to select the option.

The LCD displays the current mode (

OFF)

and then returns to the

FiniSh OPtionS

screen.

3. Use

to scroll to a new user option, or press

to exit user options and return to normal

operating mode.

Safe Display

The

SAFE dISPLAY

option automatically notifies that only

normal ambient conditions exist and that there are no gas
hazards monitored. This option can be enabled or disabled.

If this option is enabled, when the detector is in normal
operating mode and when no hazards are measured,

SAFE

scrolls across the LCD continually.

SAFE

does not display while functions are being performed.

Note

This option is automatically disabled in stealth
mode.

If any gas is present, such as

•

readings are other than zero for toxic combustible
gas(es), or

•

the oxygen reading is other than 20.9%,

the LCD displays the gas levels for all of the sensors. When
the levels return to normal,

SAFE

again

scrolls across the

screen.

Содержание BW GasAlertMicro




















































































Результаты поиска

Содержание BW GasAlertMicro

Отзывы:

Похожие инструкции для BW GasAlertMicro

Бренды по названию

Популярные бренды

Honeywell BW GasAlertMicro, Руководство пользователя

Результаты поиска

Содержание BW GasAlertMicro

Отзывы:

Похожие инструкции для BW GasAlertMicro

Бренды по названию

Популярные бренды