Honeywell ADEMCO VISTA-12A, Инструкция по установке и настройке

Страница: 5 / 112

1-1
S E C T I O N 1
Features and Installation Highlights
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
This manual describes the installation of both the VISTA-12A and VISTA-12E. These units
are identical except where noted.
Capabilities
•
Supports 2 independent partitions, which can protect two independent areas, as if each area
had its own control.
•
Supports 1 common area partition that allows either of the other two independent partitions to
arm, while leaving a common area (ex. lobby or foyer) disarmed for access into the remaining
disarmed partition.
•
Supports up to 22 protection zones plus 16 keyfob zones (zones 49-64) for total of 38 zones:
-- 6 basic wired zones (zones 1-6) with optional zone-doubling/double-balanced zone feature
-- Up to 8 additional wired zones (zones 17-24) using an 8-zone 4219/4229 module.
-- Supports up to 16 wireless transmitter zones (5800 series; zones 9-24).
-- Supports up to 4 installer-configurable zone types
•
Up to 16 User Level Security Codes, each with separate authority levels and partition access
Downloading: Via an IBM compatible computer, Compass downloading software, and an
ADEMCO CIA/CIA-EU modem.
Functions
•
Single-button arming feature: Can use dedicated keys to arm the system AWAY or STAY
•
Up to 8 Schedules, to control output devices, to determine when users have access, and/or to
auto-arm/disarm (or allow disarm) the system
•
Up to 2 Keypad macros, which can be activated by wired/wireless keypads
•
Paging feature allows certain system conditions to be reported to up to 2 pager phone
numbers; can use a dedicated key on keypads to send a signal to a pager
•
User programmable telephone number for audio “beeps” reporting of alarms to the user
(follow-me feature).
•
Built-in Telephone Line Monitoring option can monitor the telephone line voltage and can
cause a local display, or a display and trouble/alarm sound.
•
Event Logging records up to 254 selected events in a history log; control and readout from the
log is done via ADEMCO Compass Downloader software or using an installer/master code at
an alpha display keypad for local display.
•
Installer-customized zone descriptors for all zones (useful only when using alpha display
keypads).
•
Optional siren supervision detects external sounder wiring short or open; causes a trouble
condition, keypad display, and sends a report to the central monitoring station, if enabled.
•
Optional RF jam detection for wireless systems detects a condition that may impede proper RF
reception (i.e., jamming or other RF interference); causes keypad display, sends a report to the
central monitoring station (if trouble reporting is enabled), and can optionally send a tamper
alarm if detected during the armed mode.
•
Individual user code selection for open/close reporting to central monitoring station (set when
adding a user code, attribute 6).