89
Auger/Blower
Lock bolts are designed to break under force that would otherwise
damage auger and blower parts. Do not replace lock bolts with
ordinary hardware bolts.
Lock bolt replacement procedure
8 mm HEX. NUT
8 mm SPRING WASHER
10 mm HEX. NUTS
10 mm SPRING WASHERS
BLOWER LOCK BOLT
AUGER LOCK BOLT
AUGER LOCK BOLT
Place the snowblower on the level surface with parking brake
applied.
Make sure the auger clutch switch is in the ‘‘OFF’’ position, and
release the drive clutch lever.
Lower the auger to the lowest position with the auger control lever.
Turn the engine switch to the ‘‘OFF’’ position, remove the engine
switch key, and be sure that each rotating part come to a complete
stop.
Clean the auger and blower of snow, ice or any other foreign
particles.
Check the entire snow clearing mechanism.
Check the auger, auger housing, blower and lock bolts for signs of
damage or other faults. If any of the lock bolts is broken, replace them
with the one furnished with the snowblower. Additional lock bolts and
nuts are available from authorized Honda snowblower dealers.
Replace any broken lock bolts. Tighten securely.
1.
2.
4.
3.
5.
6.
7.
09/07/24 14:58:06 32797610_091
Содержание HS1810Z
Страница 105: ...100 MEMO 09 07 24 14 59 40 32797610_102...
Страница 106: ...101 MEMO 09 07 24 14 59 42 32797610_103...
Страница 107: ...102 MEMO 09 07 24 14 59 44 32797610_104...
