Honda HS1810Z, Руководство пользователя

Страница: 49 / 116

46
Drive clutch lever
Other checks
Backward stop lever
Starting the engine and throttle control lever to the ‘‘SNOW’’
position.
Squeezing the drive clutch lever.
Be sure to park the snowblower on a level surface, set the parking
brake lever in the ‘‘PARKING’’ position, then set the shift lever in the
‘‘NEUTRAL’’ position.
Check each tightening point and joint for looseness and wobbles.
Check each part for operation.
Check each part that had been found abnormal in the previous
operating day.
Be sure to perform the following inspection.
Be sure to park the snowblower on a level surface, set the parking
brake lever in the ‘‘PARKING’’ position, then set the shift lever in the
‘‘NEUTRAL’’ position, and stop the engine.
Move the shift lever up to the limit in the direction of the ‘‘REVERSE’’
position.
Push the backward stop lever.
Check the backward stop lever moves smoothly, it is normal if the
shift lever returns to the ‘‘NEUTRAL’’ position.
When the backward stop lever is abnormally heavy, consult an
authorized Honda dealer.
Stop the engine, and the shift lever to the ‘‘NEUTRAL’’ position and
the parking brake lever to the ‘‘PARKING’’ position.
Release the drive clutch lever, and check the snowblower stops.
It is normal if snowblower can move forward at low speed.
Set the parking brake lever to the ‘‘RUNNING’’ position, and move
the shift lever to the ‘‘FORWARD’’ position of the ‘‘LOW SPEED’’
range.
1.
2.
3.
1.
2.
3.
1.
2.
3.
4.
5.
6.
09/07/24 14:52:23 32797610_048