−
−
−
−
82
The spark plug must be securely tightened. An improperly
tightened spark plug can become very hot and may damage the
engine.
Use only the recommended spark plug or equivalent. Spark plug
which has an improper heat range may cause engine damage.
Recommended spark plug:
SIDE ELECTRODE
0.7
0.8 mm
(0.028
0.031 in)
SEALING WASHER
Measure the plug gap with a feeler gauge.
Correct as necessary by carefully bending the side electrode.
The gap should be:
If installing a new spark plug, tighten 1/2 turn after the spark plug seats
to compress the washer. If reinstalling a used spark plug, tighten 1/8 to
1/4 turn after the spark plug seats.
After the spark plug is seated, tighten with a spark plug wrench to
compress the washer.
Make sure that the sealing washer is in good condition and thread
the spark plug in by hand to prevent cross-threading.
0.7
0.8 mm (0.028
0.031 in)
5.
6.
7.
ZGR5A (NGK)
J16CR-U (DENSO)
09/07/24 14:57:07 32797610_084
Содержание HS1810Z
Страница 105: ...100 MEMO 09 07 24 14 59 40 32797610_102...
Страница 106: ...101 MEMO 09 07 24 14 59 42 32797610_103...
Страница 107: ...102 MEMO 09 07 24 14 59 44 32797610_104...