Honda 2007 CR125R, Руководство пользователя

Страница: 72 / 144

Brakes
Brake Pad Wear
Brake pad wear depends on the severity of usage
and track conditions. (Generally, the pads will
wear faster on wet and dirty tracks) Inspect the
pads at each regular maintenance interval (page
21).
Front Brake Pads
Inspect the pads (1) through the front wheel to
determine the pad wear. If either pad is worn
anywhere to a thickness of 0.04 in (1 mm), both
pads must be replaced.
(1) brake pads (3) brake disc
(2) front brake caliper
Rear Brake Pads
Inspect the pads (4) from the rear side of the
caliper to determine the pad wear. If either pad
is worn anywhere to a thickness of 0.04 in
(1 mm), both pads must be replaced.
(4) brake pads (6) brake disc
(5) rear brake caliper
Other Inspections
Check that the front lever and rear pedal
assemblies are positioned properly and the
securing bolts are tight.
Make sure there are no fluid leaks. Check for
deterioration or cracks in the hoses and fittings.
68
Servicing Your Honda
(3)
(2)
minimum thickness
indicator
0.04 in
(1 mm)
replace
(1)
wear indicator
grooves
0.04 in
(1 mm)
(1)
replace
(5)
(4)
replace
0.04 in
(1 mm)
minimum thickness
indicator
(6)
(4)
*CR125R/60-71(31KSR620).qxd 5/6/05 1:13 PM Page 68