Honda 2007 CR125R, Руководство пользователя

Страница: 62 / 144

Reed Valve
Refer to Safety Precautions on page 19.
Reed Valve Removal
1. Remove the carburetor (page 104).
2. Remove the insulator (1) and reed valve (2)
from the cylinder by removing the six
carburetor insulator mounting bolts (3).
3. Remove the gasket.
(1) insulator
(2) reed valve
4. Remove the reed valve inner (4) from the reed
valve assembly (5).
(4) reed valve inner
(5) reed valve assembly
Reed Valve Inspection
1. Check the reed valves (1) for damage or
fatigue and replace them if necessary.
2. Replace the reed valves with new ones if the
seats are cracked or damaged.
(1) reed valves
Reed Valve Disassembly/Assembly
1. Remove the reed valve mounting screws (1),
stopper (2), sub-reed valve (3), and reed valve
(4).
2. Align the cut-outs (5) between the reed valves
and stoppers, then install them onto the cage.
(1) reed valve mounting screws (4) reed valve
(2) stopper (5) cut-out
(3) sub-reed valve
3. Apply a locking agent to the reed valve
mounting screw threads.
4. Install and tighten the mounting screws to the
specified torque:
0.7 lbf·ft (1 N·m, 0.1 kgf·m)
5. Make sure that the clearance between the reed
valve and cage (6) is less than the 0.008 in
(0.2 mm).
(4) reed valve (6) cage
58
Servicing Your Honda
(2)
(3)
(1)
(1)
(4)
(5)
(6)
(4)
(5)
(4)
(1)
(2)
(3)
(3) carburetor insulator
mounting bolts
*CR125R/49~59(31KSR620).qxd 5/6/05 2:05 PM Page 58