Honda 2007 CR125R, Руководство пользователя

Страница: 68 / 144

64
Servicing Your Honda
Suspension
Optional Stiffer (0.46 kgf/mm) Fork Spring
• Be sure to check the oil level. Some oil will
be left in the fork tube when the oil is drained
and causes the oil level to be raised slightly.
• Be sure the oil level is the same in both fork
legs.
• Always use the after market syringe while
adjusting the oil level.
If it isn’t used, air may get into the fork.
• If a syringe is not available, first set the oil
level somewhat lower than the normal, then
add small amounts of oil until the correct level
is obtained, measuring the level each time oil
is added.
13. Remove the lock nut and spring guide
together.
Install the partition plate (6).
(6) partition plate
14. Install the spring guide (3) as shown.
Loosely install the lock nut (2).
(2) lock nut (3) spring guide
15. Install the fork spring, spring seat and fork
cap as described in Front Suspension Oil
Level Adjustment (page 84-91).
Standard oil
level
[capacity]
Maximum oil
level
[capacity]
Minimum oil
level
[capacity]
3.0 in
75 mm
15.5 US oz
(458 cm
3 )
1.6 in
41 mm
16.7 US oz
(493 cm
3 )
4.6 in
117 mm
14.1 US oz
(416 cm
3 )
Slightly stiffer as
it nears full
compression.
Slightly softer as
it nears full
compression.
2 scribe marks 



(2)
(3)
(6)
*CR125R/60-71(31KSR620).qxd 5/6/05 1:13 PM Page 64