Honda 2007 CR125R, Руководство пользователя

Страница: 67 / 144

Servicing Your Honda
63
Suspension
(cont’d)
10. Pour the remaining fork oil into the damper
rod (5) until a little oil flows out of the top
of the rod. Pump the piston rod slowly 8 -
10 times through a stroke of 10 in (25 cm).
Gently slide the fork tube (7) down onto the
lower end of the slider pipe (8).
Wait about 5 minutes.
(5) damper rod (8) lower end of the slider
(7) fork tube pipe
11. With the fork tube held upright, measure the
oil level (9) from the top of the tube.
(9) oil level
12. Adjust the oil level by adding or removing
the oil with an after market syringe (10).
(10) syringe
Fork Oil Level
Standard (0.44 kgf/mm) Fork Spring
(7)
(8)
(9)
(10)
(5)
(7)
No mark
(factory products)
Standard oil
level
[capacity]
Maximum oil
level
[capacity]
Minimum oil
level
[capacity]
2.8 in
71 mm
15.6 US oz
(462 cm
3 )
1.5 in
37 mm
16.9 US oz
(499 cm
3 )
4.4 in
113 mm
14.2 US oz
(420 cm
3 )
Slightly stiffer as
it nears full
compression.
Slightly softer as
it nears full
compression.
Standard oil
level
[capacity]
Maximum oil
level
[capacity]
Minimum oil
level
[capacity]
2.6 in
67 mm
15.8 US oz
(466 cm
3 )
1.3 in
33 mm
17.1 US oz
(505 cm
3 )
4.3 in
108 mm
14.4 US oz
(425 cm
3 )
Slightly stiffer as
it nears full
compression.
Slightly softer as
it nears full
compression.
Optional Softer (0.42 kgf/mm) Fork Spring
1 scribe mark












*CR125R/60-71(31KSR620).qxd 5/6/05 1:13 PM Page 63