Honda 2007 CR125R, Руководство пользователя

Страница: 50 / 144

46
Servicing Your Honda
Clutch Cover/Disc/Plate Removal
1. Drain the transmission oil (page 37).
2. Remove the rear brake pedal (1) by removing
its pivot bolt (2).
(1) rear brake pedal (2) pivot bolt
3. Remove the five clutch cover bolts (3) and
clutch cover (4).
(3) clutch cover bolts (4) clutch cover
4. Remove the five clutch spring bolts (5) and
clutch springs.
Loosen the bolts in a crisscross pattern in 2 or
3 progressive steps.
5. Remove the clutch pressure plate (6).
(5) clutch spring bolts
(6) clutch pressure plate
6. Remove the clutch lifter (7) and clutch lifter
rod (8).
7. Remove the eight clutch discs and seven
clutch plates (9).
Turn the lifter bearing plate of the clutch lifter
bearing with your finger. The bearing plate
should turn smoothly and quietly. Discard the
clutch lifter if the bearing plate does not turn
smoothly.
(7) clutch lifter (9) clutch discs and plates
(8) clutch lifter rod
Clutch Disc Inspection
Replace the clutch discs (1) if they show signs of
scoring or discoloration.
Measure the thickness of each clutch disc.
Service Limit:
0.112 in (2.85 mm)
Replace the clutch discs and clutch plates as an
assembly.
(1) clutch disc
Clutch Spring Inspection
(1) clutch spring
Measure the free length of each spring.
Service Limit:
1.39 in (35.2 mm)
Replace the clutch springs as a set if any one of
them is beyond the service limit or if the clutch
plates have been burnt/heat discolored.
Clutch System
(9)
(7)
(8)
(6)
(5)
(2)
(1)
(3)
(4)
(1)
(1)
*CR125R/24-48(31KSR620) 5/6/05 1:12 PM Page 46