Operation
49
(available for download in the „Downloads“ area of the
website www.homematic.com).
8 Operation
After teaching-in has been performed, simple
operations are available via the taught-in Homematic
device. Via the taught-in device (e.g. remote control),
you can switch on and off the switching actuator with
one button (toggle function) or two buttons.
9 Resetting to the initial state
To reset the actuator to the initial state, proceed as
follows:
• Put the device into teach-in mode using the first
channel button (hold it down for at least four
seconds).
• If the device is in teach-in mode, hold the first
channel button down for at least four seconds again.
If the device LED flashes quickly, this indicates that
the actuator is being reset.
