Hazard information
32
2 Hazard information
We do not assume any liability for damage to
property or personal injury caused by improper
use or the failure to observe the safety
instructions. In such cases, any claim under
warranty is extinguished! For consequential
damages, we assume no liability! Especially
observe the safety and handling instructions in
the chapter “Installation”!
The actuator that is described is part of a build-
ing installation. When planning and setting up
electrical installations, the standards and guide-
lines which are applicable in the country in
which the equipment is installed must be com-
plied with.
The device has been designed solely for opera-
tion on a 230 V/50 Hz AC supply. Only qualified
electricians (to VDE 0100) are permitted to carry
out work on the 230 V mains. Applicable accident
prevention regulations must be complied with
whilst such work is being carried out.
To avoid electric shock, disconnect the mains
voltage prior to starting work on the device (trip
