Start-up
46
•
Activate the teach-in mode of your switching actua-
tor. Therefore, press and hold down the channel but-
ton for at least 4 seconds. The device LED will flash
continuously to indicate that teach-in mode is active.
The teach-in time is 20 seconds.
•
Now put the device you wish to teach-in the swit-
ching actuator into teach-in mode. Please follow the
relevant operating manual instructions of the corre-
sponding device.
If no teach-in is carried out, teach-in mode will be
exited automatically after 20 seconds. If other de-
vices are also in teach-in mode, they will be
taught-in.
7.2.2 Teaching in to a Homematic CCU
Your device can be conveniently
• controlled and configured,
•
connected directly to other devices or
•
used in central control programs
via the Homematic software „WebUI“. Therefore,
your switching acutator has to be taught-in to the
Homematic Central Control Unit first. New devices are
taught-in to the Central Control Unit via the Homematic
„WebUI“.
