Start-up
45
•
LED on - relay contact enabled
•
LED off - relay contact disabled
7.2 Teaching-in
Please read this entire section before starting
the teach-in procedure.
To integrate the switching actuator into your Home-
matic system and enable it to communicate with other
Homematic devices (e.g. Homematic Remote Control),
you must teach it in first. You can teach-in the swit
-
ching acutator directly to other Homematic devices or
to the Homematic Central Control Unit:
7.2.1 Teaching-in to Homematic devices
If you would like to teach-in the switching acutator to
one or more Homematic devices, you must put the
devices to be taught-in into teach-in mode and select
the required teach-in channel. To do this, proceed as
follows:
During teach-in, please make sure you maintain
a distance of at least 50 cm between the de-
vices.
