Hologic ThinPrep, Руководство оператора

Страница: 73 / 230

O
PERATION OF THE
I
MAGER
D
UO
3
Imager Duo Operator’s Manual 3.7
The Server stores the slide-related data and controls communication of all sys-
tem services to the other devices on the network. It is the master controller
when more than one Image Processor is connected to the Server.
SLIDE LABELING
The camera that scans the slide label accession ID recognizes 1-dimensional or
2-dimensional barcode format (1-D or 2-D) or OCR (optical character recogni-
tion) format. It cannot read both at the same time. Prior to running a batch,
select the label format via the User Interface, see Lab settings,page 4.56.
Note:
Slide cassettes must not have mixed label formats.
Refer to Figure 3-8.
OCR Imager format must be 14 digits long in two rows, 7 digits over 7 digits,
with the patient ID being 11 digits and a 3 digit CRC at the end. The font must
be 12 point OCR-A. Numbers only, no alpha characters.
Note:
For OCR Imager format, ‘9999’ as the last 4 digits before the CRC are
reserved for field service use. Slide IDs with those reserved numbers are
removed from the patient database during a service visit, so do not use
that sequence.
Slide Barcode labels may be 1- or 2- dimensional; see the table below for any
restrictions required.Refer to Figure 3-8. Slide labels may be printed and
applied or directly printed or etched onto the slide, but make sure the contrast
is sufficient for the scanner to read the label.
Table 3.1: Slide Restrictions Based on Barcode Symbology Used
1-D Code 128 All printable ASCII 128 characters are supported. The barcode width varies
with content. Minimum of 5 characters is required and maximum of 8
alphas or 14 digits will fit on a slide. Mixing will shorten the max length.
1-D Interleaved 2 of 5 Only digits are supported. 5,7,9, or 11 char1 (optional) check digit
is the format.
1-D Code 39 Supported characters are A-Z, 0-9, - + . $ / % ‘space’ Minimum of 5
characters is required and maximum of 6 characters will fit on a slide. (A
single character check digit is optional.)
1-D Code 93 All printable ASCII 128 characters are supported. A minimum of 5 charac-
ters is required and a maximum of 8 characters will fit on a slide.
2-D datamatrix All printable ASCII 128 characters are supported. A maximum of 16 charac-
ters is supported.
SECTION
D