Hologic ThinPrep, Руководство оператора

Страница: 70 / 230

3
O
PERATION OF THE
I
MAGER
D
UO
3.4 Imager Duo Operator’s Manual
3. At the Server, push on the power button. See Figure 3-3.
Figure 3-3 Power on the Server
4. At the rear of the Imaging Station (Figure 3-4), position the Power rocker-
switch to ON ( l ).
Note:
The Imaging Station should be turned on before turning on the Image
Processor Controller.
Turning on power to the Imaging Station initiates a 2-minute warm-up
cycle. During this time, the sliding doors are locked to prohibit loading
and unloading of Slide Cassettes.
Figure 3-4 Imaging Station, Power Switch
Power On Button
Note - depending on which
model computer you have, it
may look different than this
graphic
Power
Switch
Rear
Front
Power On Indicator
Firewire conn. USB conn Serial conn Service
to IPC to IPC to IPC Port