Holiday Rambler Imperial 2008, Руководство пользователя

Страница: 64 / 276

EXTERIOR & INTERIOR CARE — 3
60
2008 IMPERIAL
Remove old sealant that is not adhered.
Sealant that is secured need not be removed.
Dirty or damp surface areas will compromise
sealant effectiveness. Thoroughly clean and dry
the surface area before applying new sealant.
Lay masking tape around the area to be sealed
to stop sealant from spreading beyond the
desired area. Using a caulking gun, apply new
sealant as needed. Work the caulking gun in a
manner that will cause the sealant to fully adhere
to the applied area. Allow adequate cure time.
Roof air conditioners use a closed cell foam base
gasket and do not require sealant. The roof air
conditioners should be regularly inspected for
tightness at the four mounting bolts, one located
in each interior corner of the air conditioner
roof opening. Torque speci
fi cation is 40 to 50
in/lbs. The base gasket should be compressed to
approximately a ½".
Acrylic Sealants:
Product Manufacturer Geocel Part # 2300
Used where items are sealed under a
painted surface such as the metal corners of
slide out rooms and roof mounted awning
brackets. The material is specially formulated
to allow paint adhesion.
Black Urethane:
Product Manufacturer Bostik Part # 1100
Used for sealing windshields only. Black
Urethane is available in a tube that applies
similar to silicone. Clean up using solvents such
as paint thinner. Gloves are required as this
considered a hazardous material.
Silicone:
Product Manufacturer Dow Corning Part # 733
Product made in several colors. Primarily
used on the sidewalls around windows, doors,
handles, belt line molding, latches and bases
of surface mounted items such as clearance
lights. Old peeling sealant should be removed
with nylon sticks or equivalent. Metal utensils
can scratch the painted surface. Avoid lacquer
thinners or ketone based solvents as these
chemicals can damage painted surfaces.
Con
fi rm that surface is clean and dry before
a new application. Cut the tube at an angle
with the smallest usable opening. Avoid a
heavy bead. A little goes a long way. Wear a
disposable latex glove and use
fi nger at a 45°
angle on beaded surface to smooth out product.
Keep rags or paper towels handy for clean up.
Use care when applying silicone and plan ahead
before applying. Look for obstacles that may
impede application.
Spray Foam:
This product is used as a sealant where a hole
has been made for items such as water lines
or wires that are coming through a
fl oor or
bulkhead opening.
070209b
Typical Side View:
Side window seals require silicone. Windshield requires Black Urethane.
070309C
Typical Roof Layout:
Inspect each item for sealant integrity. Acryl-R is used as a roof sealant. Roof A/C’s use a special foam gasket.