Holiday Rambler Imperial 2008, Руководство пользователя

Страница: 143 / 276

139
2008 IMPERIAL
EQUIPMENT — 5
Operation:
Insert batteries. The
Harmony welcome screen
will display.
Press the “Next” button to
access the main screen.
Press the “Next” button
again to access directions,
or press an activity
button at the top of the
remote to activate speci
fi c
entertainment components
(
see illustration ).
Press “Off” button at top
of remote at any time to
turn off all components
activated by the universal remote.
NOTE:
Press “Next” button after turning
components on to access Help Menus.
NOTE:
Only qualified personnel should program
the universal remote. Refer to OEM for
detailed operating instructions.
‹
‹
‹
‹
SATELLITE (Optional)
KVH R6 Satellite System (Optional)
The KVH R6 satellite system includes an
antenna (dish), 2 HD (high de fi nition) receivers,
a remote and RF (radio frequency) receiver.
The receivers power the antenna, decode the
satellite signal from the antenna and send it to
the television. The RF receiver decodes signals
from the remote control and sends them to the
receiver. The remote does not need to be pointed
directly at the RF receiver.
NOTE:
Satellite service requires subscription
activation. Contact your service
provider to activate the account.
NOTE:
For specific satellite coverage areas and
providers see the OEM manual.
Turning On the Antenna:
1. Turn on the receiver.
2. Wait 30 to 60 seconds for the antenna
to acquire the satellite signal.
3. Turn on the TV and press the input
button on the top of the TV until the
Satellite screen displays.
4. The two following messages will
appear in succession. It takes
approximately one minute for the
receiver to download guide data.
Channels can be selected once the
guide is downloaded.
Signal Not Available - If this message
does not appear after 30 seconds, press
the
SAT button on the remote control.
Then press the remote’s PWR button.
The receiver will beep twice, the
Antenna status light will
fl ash and the
Voltage status light will turn on. If the
receiver’s Voltage status light is off,
press the power switch on the front of
the receiver to turn on the receiver.
Acquiring Guide Data – If this message
does not appear after the fi rst message,
ensure that the antenna has a clear view
of the satellite. The antenna requires an
unobstructed view of the sky to receive
satellite TV signals.
NOTE:
Inclement weather conditions may
adversely affect the satellite signal
acquisition. Degraded audio and video
signals through the receiver will result.
NOTE:
HD (High Definition) ready receivers
are included with the In-Motion Satellite
System. Channel availability will vary
with satellite system and providers.
Consult the OEM manual for providers,
coverage areas and channel availability.
Maintenance:
Periodically clean the antenna dome with
water and mild soap if necessary. Do not spray
the dome or the roof with high pressure water.
For assistance in operation or for technical
support, call KVH Technical Support at
1-401-847-3327 .
‹
‹
Turns on TV
and sets to
DVD
Input. Turns
on the
Sony Home
Theater
System and
sets DVD
playback.
Turns on TV and sets
to TV tuner (antenna
must be turned on
manually).
Turns on the Sony
Home Theater
System and sets the
CD playback.
Displays all
programed
options,
including
Satellite TV.
Use NEXT
button to
scroll through
options. Press
buttons to left
or right of LCD
to select.
031269b
031269b