Holiday Rambler Imperial 2008, Руководство пользователя

Страница: 193 / 276

189
2008 IMPERIAL
ELECTRICAL SYSTEMS - HOUSE — 8
LIGHTS
Interior Halogen
The bulbs inside
the halogen
lighting are
replaceable.
To Replace a Bulb:
1. Rotate the
outer trim ring
counterclockwise and
remove.
2. Carefully grasp bulb and pull from
socket.
3. Use a clean cloth or piece of tissue to
grasp new bulb. DO NOT touch bulb
directly as this can cause a “hot spot”
and result in immediate bulb failure.
4. Align contacts of bulb with terminals in
fi xture base. Insert bulb until contacts
are fi rmly seated.
5. Align tabs in trim ring with slots in
fi xture base. Rotate lens clockwise
until trim ring locks into place.
CAUTION:
DO NOT touch halogen lighting while
on. They can cause a burn. DO NOT
touch replacement bulbs. Oil in the
hands can cause a “hot-spot” to occur. If
the bulb is touched, allow it to cool and
clean the bulb with alcohol.
Map Lights
Operation:
Turn the light on and off by aligning the
pointer on the back of the light with the ON and
OFF indicator on the front portion of the light.
To Replace a Bulb:
1. Align the pointer on the back of the light
to the position to remove the cover.
2. Remove cover and lift bulb from holder.
3. Replace with a 12 Volt DC 4 Watt
type 1816 bulb and install cover by
realigning the pointer to the same
location. Turn cover to
OFF or ON
position.
If Map Lights Fail to Operate:
Ensure interior house power is turned ON .
Check fuses in front electrical bay on the
roadside.
‹
‹
BULB USAGE - INTERIOR
080476b
060200c
080476
INTERIOR BULB CHART
LOCATION BULB NUMBER
FLUORESCENT
CEILING LIGHTS
F15T8 - CW
DINETTE 12V DC C912
ROUND 3 " HALOGEN
CEILING LIGHT
12V DC 10W Type T-3
ROPE LIGHT LITCO 31-120-40
ENTRY HANDLE
LIGHT TUBE
MP# 16615157
MAP LIGHT 1816 12V DC 4W
STEPWELL LIGHTS 90416
CLOSET LAMP 12V DC 10W Type T-3