Hofmann FPA12144, Инструкция по эксплуатации

Страница: 23 / 44

23 of 44
7.12 SAFETY AND OPERATING INSTRUCTIONS
1. Inspect your lift daily. Do not operate it if malfunctions occur or damaged parts have
been found.
2. Never attempt to overload the lift. The manufacturer’s rated capacity is shown on the
serial number tag on the power post.
3. Operating controls, DO NOT OVERRIDE the safeties. The mechanical safeties are
designed to engage automatically on the way up. Press the up switch of the power pack
to go up. When the desired height is reached, lower onto the safety. To lower, raise off
of the safety locks, then press the air release valve and the lowering release lever at the
same time.
4. Only trained and authorized personnel should operate the lift. Do not allow customers or
bystanders to operate the lift or be in the lift area.
5. Caution , never work under the lift unless the mechanical safety locks are engaged.
6. Before driving vehicle on, make sure lift is in the fully down position.
7. Before removing the vehicle from the lift, make sure the lift is in the fully down position
and ensure that all tools have been removed from the deck surfaces.
8. Always keep the lift area free from debris. Grease and oil spills should always be cleaned
up immediately. Never leave any tools or parts lying on the decks.
9. Never operate lift with passengers in vehicle.
NOTE: DO NOT ATTEMPT TO OPERATE THIS LIFT IF ANY PART IS NOT WORKING PROPERLY
OR YOU HAVE NOT READ THE COMPLETE OPERATING INSTRUCTION MANUAL.