IQ32 SDR TRANSCEIVER OPERATIONS MANUAL
P a g e
| 38
The labels of the memory button
may be edited to reflect your oper-
ating conditions.
Although the button names may
change, the macro associated with
the button remains unchanged.
Touch the
Edit
button followed by
the
Memory 1
button, Figure 51,
and the label will be displayed be-
low the first column of buttons.
Using the keyboard, you may edit
the label name. Type in the new
name and press the enter key on
the keyboard and the new label
will appear on the desired button.
The next button label will appear
to be edited.
To end the editing session and save the new button name, touch the
LO Freq
widget.
Button names may contain up to 10 characters, including space and punctuation.
The
F Offset
button is used for
adding an offset to the displayed
frequency of the IQ32 when using
a transverter.
For example, if you have a trans-
verter with an IF of 28MHz and an
RF of 144MHz, you would need to
correct the displayed frequency by
adding an offset of 116MHz.
Touch the
Edit
button followed by
the
F Offset
button to get the dis-
play as shown in Figure 52.
Figure 51: Memory Button Label Editing
Figure 52: Transverter Offset Adjustment
