Hobby-Lobby Telemaster 40 Deluxe, Инструкция по сборке

Страница: 14 / 30

12
c
12
c
10
c
11 Note that at the center of the false trail-
ing edge and false leading edge there is
a low spot. This is to accommodate the
center section sheeting. Before installing
it you will need to sand the top of the false
trailing edge and the false leading flush to
and at the same angle as the ribs.
Install and glue the center section top
sheeting sections SCS-A and SCS-F. Af-
ter the glue has cured, remove the dash
cut material in the center to allow for in-
stallation of the vertical fin.
Install the top spar from 1/8” X 1/2”
basswood stock. Taper the ends to butt
fit to the stabilizer tips SWT. When your
satisfied with the fit of this bevel, glue the
top spar into position.