22
The following pages contain the parts locator list. Use this to quickly locate required parts.
Aircraft Weight
Oz. Per Sq. Ft.
Lbs.
Oz.
Wing Loading
5
0
13.7
5
4
14.3
5
8
15.0
5
12
15.7
6
0
16.4
6
4
17.1
6
8
17.8
6
12
18.4
7
0
19.1
7
4
19.8
Wing loading chart
c
7
c
6
c
5
c
4 Carefully align the slot in the flap hard
point block (FLHPB) with the slot in FLHP
and glue in place.
Before installing the top sheet, the lead-
ing and trailing edges as well as FLHPB
must be sanded to contour with the flap
ribs. Take care not to sand into the ribs or
the position tabs on the leading edge, just
sand down to them and then glue on the
top sheeting (FLT).
The flap control horn can be installed af
-
ter the flap has been covered.
When installing the flap onto the wing, it is
a good idea to pin the hinges after gluing.
This can easily be accomplished bu drill-
ing a 1/16th inch hole through the bottom
sheeting, the hinge and the flap leading
edge and wing trailing edge and the glu-
ing in a round tooth pick. Trim the tooth
pick
ABOVE: The flap assembly has been sanded to contour
with the ribs and the top sheet is ready to be installed.
Note that the position tabs on the leading edge have not
been sanded.
ABOVE: The assembled flaps, on the right with the con
-
trol horn and the hinges temporarily installed. These will
be removed and the final installation will be after the flaps
are covered.
Содержание Telemaster 40 Deluxe
Страница 2: ......
Страница 29: ...27 ...
Страница 30: ...Hobby Lobby International 5614 Franklin Pike Circle Brentwood TN 37027 USA Phone 866 512 1444 ...
