Hobby-Lobby Telemaster 40 Deluxe, Инструкция по сборке

Страница: 10 / 30

8
Place the remaining magnet near the one
installed in FHMP and let them join. Mark
the top of the top magnet with a magic
marker. Locate the hatch components
FHA and two FHA-H. Place the FHA on
the bench with the labeled side down and
install the remaining magnet in the hole
provided with the side you just marked
facing down. With the labeled side still
facing down, install the two FHA-H rail
hooks.
c
21
c
22
c
23
Install and glue the 4” length of 3/8” tri -
angle stock in the notch provided at the
base of the windshield. The wide side of
the triangle stock will be perpendicular to
FHMP.
Install and glue WS, note that a small
chamfer must be planed into it at the top
where it contacts F2.
ABOVE: 3/8” Triangle stock installed.
Below: Windshield (WS) has been added.