Hobby King ORX TX10i, Инструкция по эксплуатации

Страница: 15 / 24

Aux. channels
This function allows users to set auxiliary channels. Every channel that is not assigned during the
model setup will be set as an AUX channel. AUX channels can be used to control various extra
features on an aircraft including landing gear, brakes, lights.
Setup:
1. Press the wheel to change source from aux channel 5 to 10 (And after channels not in use).
2. Move the wheel to assign a switch.
3. Press and hold the wheel to save and exit, or press the cancel key to exit without saving.
=Aux. channels=
+Channel 5
+Source None
Channel 6
Source Used
Assign switches
=Aux. channels=
+Channel 7
+Source None
Channel 8
Source None
=Aux. channels=
+Channel 8
+Source None
Channel 10
Source None
The Assign switches function enables the user to assign a switch to the Flight mode and Thr. hold
(throttle hold) functions.
Setup:
1. Press the wheel to switch between Flight mode and Thr. hold (throttle hold).
2. Use the wheel to assign a switch.
3. Press and hold the wheel to save and exit, or press the cancel key to exit without saving.
Display
=Assign switches=
Flight mode
+Sw: None
Thr. hold
Sw: None
This function displays the transmitter's channel output and can be used to test output and servo
range.
Setup:
Press and hold the cancel button and the servos will move slowly though their entire range. Press
the icon again to disable the function.
*Make sure the model engine is powered off while the test function is activated! If powered on, it
will rev-up and possibly will lead to damages or personal injury .
.. •••••••••7x 1a =
ID CHANNEL TRANSMITTER
15
�
� '"""'
I
DICITALPRDPDRTIDNAL PRDCRAMMABLE
�I
•--=:: �
"-' .,. � � J RADIDCDNTADL SYSTEM
��®