HNP Mikrosysteme mzr-2521 Скачать руководство пользователя страница 62

Страница: 62 / 92

9 »Motion Manager« software (optional)

Operating manual mzr-2521 and mzr-2921

Technical data subject to change without prior notice!

Last update: June 2019

»Motion Manager« software (optional)

The »Motion Manager« software enables operation and configuration of the

drive and offers a possibility of an online graphic analysis of the operating data.

The software is delivered on CD. The program may be installed on a PC running

under Windows 7

, Windows 8 or Windows 8.1

operating systems.

Install the software »Motion Manager« by starting the program »Setup« from

the CD.

If the »Motion Manager« CD are not available, and you have received for

example the »mzr-pump control« software, you may still download this program

from the web site http://www.hnp-mikrosysteme.de/download-center.html or the

web site www.faulhaber.com (menu support - download). Here, the latest

version is always available in English and German.

After the installation the »Motion Manager« program may be loaded from the

»Faulhaber Motors« folder from the Windows start menu.

In order to program the drive, the micro annular gear pump should be put into

operation. The drive should be connected to the PC with the delivered

null-modem cable.

9.1

Direct drive control

The »Motion Manager« software enables to send the input commands directly to

the drive. This allows execution of movement commands and modification of the

drive parameters. (see figure 35)

figure 35

Motion Manager software for direct control of the drive

Содержание mzr-2521





























































































Результаты поиска

Содержание mzr-2521

Отзывы:

Похожие инструкции для mzr-2521

Бренды по названию

Популярные бренды

HNP Mikrosysteme mzr-2521, Руководство по эксплуатации

Результаты поиска

Содержание mzr-2521

Отзывы:

Похожие инструкции для mzr-2521

Бренды по названию

Популярные бренды