2 Safety instructions
Operating manual mzr-2521 and mzr-2921
8
Technical data subject to change without prior notice!
Last update: June 2019
2
Safety instructions
Please comply not only with the general safety instructions listed below, but also
with specific safety instructions mentioned in the following chapters.
2.1
Safety symbols in this operating manual
Non respect of the safety instructions marked with the following signs represents
danger to
people
:
Danger symbol
High voltage symbol
!
Safety symbol according to
DIN 4844 --- W9
Safety symbol according to
DIN 4844 --- W8
Non compliance with the safety instructions marked with the following sign
represents a risk of damage to the
micro annular gear pump
:
Warning
Operating instructions machined directly on the pump such as the indication of
liquid input and output should be followed and kept in a clearly readable
condition.
2.2
Staff qualification and training
The staff operating, servicing, inspecting and assembling the pumps must
evidence the appropriate qualification for these works. Areas of responsibility and
competence as well as monitoring of the staff must be precisely regulated by the
operator in charge. If the personnel do not have the necessary knowledge, they
must be trained and instructed accordingly. If necessary, this can be implemented
by the supplier or the manufacturer on behalf of the operator. Furthermore, the
operator in charge must ensure that the content of the present manual has been
fully understood by the personnel.
2.3
Safety-conscious work
The safety instructions listed in this operating manual, applicable national
regulations concerning accident prevention as well as internal work, operation
and safety regulations of the operator must be complied with.
