HMS TYTAN 5, Инструкция по эксплуатации

Страница: 17 / 33

17
Step 3
a. Attach the part (#21) to the part (#5) using (2) Hex Bolts M10*65 (#66). Note: Wrench tighten bolt (#66) then loosen nut just
enough for part (#21) to pivot freely.
b. Attach the part (#18) to the part (#5) using (1) Hex Bolt M8*45 (#73). Screw the part (#40) to the part (#18).
c. Insert the Plug 50*25 (#46) into the part (#7). Insert the Shaft (#26) through the part (#7) and the part (#1) until it is flush with both
ends.
d. Attach the Shaft (#26) to the part (#7) using (2) Hex Bolts M8*20 (#64).
e. Rotate the part (#18) and screw the part (#40) for locking the part (#7).
f. Attach the part (#80) to the part (#4) using (2) Hex Bolts M8*12 (#81).
Step 4
a.
Insert the Plug φ50 (#50) into the part (#10).
b. Attach the part (#10) to the part (#7) using
the Hex Bolt M12*90 (#62). Note: Wrench
tighten bolt (#62) then loosen nut just
enough for part (#10) to pivot freely.
c. Set the part (#42, #41) onto the part (#10) in
turn.
d.
Slide the Foamφ80*260 (#45) onto the part
(#10).
e. Set the Comfort Grip (#41) onto the part (#9).
Attach the part (#9) to the part (#10) using (1)
Arc Washer 10 (#58) and (1) Hex Bolt
M10*25 (#65).
f. Assemble the other Pec Arm (#11) using
same method.