Fig. 11
Fig.12
Fig.13
Fig. 14
15. Attaching the bottle holder.
Remove screws(92) located on the main post(8) Fig.11 and fit the bottle
holder(105) using the same screws(92).
16. Levelling
Once the unit has been placed into its final position,make
sure that it sits flat on the floor and that it is level .This
can be achieved by screwing the adjustable feet(43) up
or down,as shown in Fig.12.
17. Movement & storage
The unit is equipped with wheels located at the front of your unit
make it easier to move it into a chosen position ,by lifting the
rear of the unit up slightly and pushing it, as shown in Fig.13.
Store your unit in a dry place,preferably not subject to changes
in temperature .
18. Mains connection
Insert the jack(m) on the transformer (79) into the connection
hole(k) on the main body(35)(bottom,rear of the machine) and
then plug the transformer into a 220V mains supply,Fig.14.
