HMS AnyBus-X AB7607 Скачать руководство пользователя страница 49

Страница: 49 / 128

Chapter 5

DeviceNet 5-1

AB7607 User manual

DeviceNet Interface

Network Communications

The Anybus-X Ethernet to DeviceNet Gateway acts as a DeviceNet Master or a

slave. The Anybus-X, as a master, can exchange I/O data with up to 63 nodes. The

module can also act as a slave to another DeviceNet Master, exchanging the con-

tents of its I/O tables with the master.

Configuration

The Anybus-X is configured using a DeviceNet configuration tool such as RSNet-

Worx for DeviceNet or NetTool-DN. The tool will access the module over the

DeviceNet network. The Anybus-X supports a Scanner Configuration and Scan

List object as the configuration interface over DeviceNet.

Automatic Baud Rate Detection

Depending on its configuration, the Anybus-X can set its DeviceNet baud rate

automatically. If the autobaud option is enabled, the module will detect the current

network baud rate and set its baud rate accordingly before joining the network. If

the option is disabled, the module will join the network with the configured baud

rate.

Содержание AnyBus-X AB7607

































































































































Результаты поиска

Содержание AnyBus-X AB7607

Отзывы:

HMS AnyBus-X AB7607, Руководство пользователя, Страница: 49 / 128

Результаты поиска

Содержание AnyBus-X AB7607

Отзывы: