manualshive.com logo in svg

HMS AnyBus-X AB7607, Руководство пользователя, Страница: 23 / 128

Поделиться
Скачать
HMS AnyBus-X AB7607 Скачать руководство пользователя страница 23

Configuration 3-7

© 2005 HMS Industrial Networks

AB7607 User manual

Note:

 The Anybus-X will automatically reset after the Ethernet configuration is 

downloaded from BWConfig.

Setting the IP Address with the Configuration Switch

If DHCP/BootP is not enabled or a server is not found and the Configuration 

Switch is non zero, on power up the value of the switch is used to form an the IP 

Address. The switch represents the binary value of the last byte in the 4 byte IP 

address. In this case it is 

n

.

IP address: 

192.168.1.

n

Subnet mask: 

255.255.255.0

Gateway address: 

0.0.0.0 (No gateway set)

This is a private address and can only be used on a local intranet. In such a case a 

Web Browser such as Microsoft’s Internet Explorer can be used to access the 

Anybus-X’s web page which allows changing the IP Address, Subnet mask, and 

GateWay address settings.

Note:

 A non-zero DIP switch setting will override any other Ethernet configura-

tion that is done.

Network Duplex

The duplex setting that the module will use to 
communicate on the Ethernet network.
If the network duplex is set to Auto, the mod-
ule will auto-negotiate duplex.

Half, Full, or 
Auto

Modbus Timeout

The Modbus Timeout option provides a means 
to detect the loss of the Modbus Scanner from 
the Ethernet network. If the option is enabled, 
and no Modbus requests are received within 
the configured timeout period, the module 
Run/Idle status will be set to Idle.

0-65000ms

Parameter

Description

Allowable 

Range

Table 3-1 Ethernet Network Configuration Parameters

Содержание AnyBus-X AB7607

































































































































Отзывы:

Нет отзывов