2. motor defected
2. change the motor
E7
1.
computer can’t test the safety
key signal
1. check the safety key, and well put
No pulse
1.
handle pulse wire didn’t
connect well or wire defected
1. well connect the wire or change
the wire
2. console circuitry defected
2. change the console
Problem z wyświetlaczem
1. the screw on the pcb is loose
1. tight well the scre
2. console defected
2. change the console
Treadmill Maintenance
Proper maintenance is very important to ensure a faultless and operational condition of the
treadmill. Improper maintenance can cause damage to the treadmill or shorten the life of the
product.
All parts of the treadmill must be checked and tightened regularly. Worn out parts must be replaced
immediately.
Adjustable waist belt
•
When you run, you may push off harder with one foot than with another. The severity of the
deflection depends on the amount of force4 that one foot exerts in the relation to the other.
•
This deflection can cause the belt to move off- centre. This deflection is normal and the
running belt will centre when no body is on the running belt.
•
If the running belt remains consistently off-centre, you will need to centre the running belt
manually.
•
Start the treadmill without anyone on the running belt, press FAST-key until speed reached
6kph.
•
Observe whether the running belt is toward the right or left side of the deck.
•
If toward the left side of the deck, using wrench, turn the left adjustment bolt clockwise 1/4
turn and the left adjustment bolt counter clockwise 1/4.
•
If toward the right side of the deck, turn the right adjustment bolt clockwise 1/4 turn and the
left adjustment bolt counter clockwise 1/4.
•
If the belt is still not centre, repeat the above step until the running belt is on centre.
•
After the belt is centre, increase the speed to 16kph and verify that it is running smoothly.
Repeat the above steps if it is necessary.
•
If the above procedure is unsuccessful in resolving the off-centre, you may need to increase
the belt tension.
