Assembly instruction
Step 1
Take the machine from the package
，
put on the flat floor. Connect the
signal wire which between the base frame and upright post, then fix the
upright post (right) on the main frame with 4pcs M8*40 Allen socket full
thread screws and 4 pcs M8*15 Allen C.K.S full thread screw.
Step 2
Connect the console signal wire with the upright post signal
wire, put the console on the upright post, using 4pcs Allen C.K.S full
threadscrew(M8*15)to fix the monitor on the upright post(left and
right).(Please be caution do not clamp the signal wire).
Step 3
Connect the console signal wire with the display signal wire,
then fix it with 4pcs M8*15 Allen socket full thread screw.
Step 4
Insert the lateral cover along the upright post, then
use 4PCS ST4*16 Philips C.K.S self-tapping screw to lock it
into platform and use 2PCS M4*12 screw to lock it into the
base clamp ring. Tighten up all the screws for the whole
treadmill .Finished.
